Skip to main content

Controlling Servo Motor with BLYNK app over WiFi

Hello Shippers, hope you are having a great time! Today, we are gonna build a simple project of controlling servo motor with BLYNK app over Wifi.

Overview:

The slider on the blynk app will send a value to the NodeMCU/ESP8266 and this value will be written on PIN 8 and the servo rotates that much degrees. That's the way we are controlling servo motor. Ahaa!


Things we need:

Circuit:


Connections:

  • D8 pin of NodeMCU connects to Command pin of Servo Motor.
  • 3V3 PIN of NodeMCU connects to Power PIN of Servo motor (usually RED one).
  • GND PIN of NodeMCU connects to GND of servo motor (usually BLACK one).
Simple connections, huh!

BLYNK app Setup on phone:

  • Create a New Project in BLYNK app.
  • Write Project Name and Select ESP8266 or NodeMCU from dropdown.
  • An AUTH token will be sent to your registered email, note this down.
  • Tap on the screen and add a SLIDER widget on the screen.
  • Tap on the Widget, select Digital PIN 8 and Start value must be 0 and End Value must be 180 (make sure to these values must not less than 0 and greater than 180 or you might break your servo).

NodeMCU Code:

We only need to add our AUTH ID(noted above), Wifi SSID and Password in the code and upload it to NodeMCU using Arduino IDE. In the code, we do not need to setup our pins this is already done by BLYNK in their library. If you do not have BLYNKEsp8266 library, download the BLYNKEsp library from Sketch menu --> Include Library -->Manage Libraries. Search for the BLYNK and install it.

Upload the code to your NodeMCU or ESP8266 and device will be displayed online on your BLYNK app. Click Play button on top right of your app and slide over the slider to rotate Servo as much you need.

Oh yeah!
Your suggestions and comments are always welcome! Feel free. Till then, Happy IOTing.
Labels:

Comments

Post a Comment

Popular posts from this blog

Time scheduled electric switch controlled with Blynk app

Most of the times when we go out of home for some days, we think of having some device that could switch ON/OFF (let's say)  Refrigerator  (or any other important appliance)   for some hours during the day. Today, we are going to make such time scheduled electric switch which switches ON/OFF at times which we set the in our Blynk app. Woah! Let's begin! Things we need: Hardware: 5V relay NodeMCU Jumper wires Breadboard 3V3 and 5V power source Electrical Wires Software: Arduino IDE BLYNK app It's circuit is same as we have created for our Smart Switch . So, if you already have that circuit set up, go ahead with Blynk app set up and Start playing. Circuit: Connections: D5 pin of NodeMCU connects to IN1 pin of 5V relay. 3V3 of NodeMCU connects to 3V3 powers source and GND to GND. Vcc of relay connects to 5V source and GND to GND. Live wire is connected directly to appliance. Neutral wire from source comes to relay NC pin and another w...
5 comments
Read more

Karna - The hapless Mahabharata Warrior

“Karma is a bitch.”  These must be the truest words ever spoken. Karna was so unfortunate because of his Karma. In his previous birth, Karna was a demon by name “Dambhodbhava”. He was an Asura, who like every other asura, wanted to be powerful and had a ridiculous desire to become Immortal. So, one fine day, he started to pray for Sun God “Surya Deva”. Lord Surya was impressed by his devotion and intensity of his “ Tapas  (Deep meditation)” and asked him what his desire was. Dambhodbhava who was greedy for power asked Surya to grant him the one boon no one could grant i.e. Immortality. “Everything that takes birth must die” . This was the First Law Of the Universe and Surya told the asura, he can ask for anything except Immortality. Dambodhbhava was crestfallen as he thought that all the Tapas was a waste of time. Dambodhbhava unwilling to give up, was lost in thought for a long time. He was determined to go home immortal one way or the other. So, he ...
2 comments
Read more

Automate irrigation system over internet

Hello Sailors! We are back with one more awesome IOT project where we are going to automate irrigation system. The system  can be used in homes to water the plants any time and can also be scheduled so even if you forget to water plants (lazy like me), just schedule the device and your plants get water regularly. That's another great use of IOT, aah! Overview We are going to control an AC water pump using NodeMCU/ESP8266 and blynk application. The Blynk app will have a switch controlling the pump to switch ON/OFF and an Eventor widget to schedule our pump switching with time. This way plants can be irrigated by manual switching or by scheduling with time. Things we need Hardware NodeMCU/ESP8266 5V relay Water Pump Water pipes (0.5 inch) Water flow splitter Water container Pipe clamps Jumper Wires 5V and 3.3V power supply Software Arduino IDE Blynk app If you have already setup the  Time Scheduled electric switch   go ahead to setup the water...
3 comments
Read more